Chip spreaders for road surface dressing RPU
![](https://hydrog.com/pub/images/640x480/830_chip-spreaders-for-road-surface-dressing-rpu.png)
Fixing the road surface by the best chip spreaders in the road maintenance industry
Chip spreader RPU-3000 forms together with emulsion sprinkler the set for performing the road maintenance treatments so-called road surfaces dressing „emulsion + chipping”. Tank of the spreader is on an ongoing basis filled by tipper body. Chip is spreaded by a rotating, rifled roll located below the aggregate tank. Spreading width is adjusted with leap 250 mm by the operator - pneumatically. Drive of the shaft is carried out from support wheels of the spreader. Mounting to the sprinkler is done by towbar (emulsion sprinkler shall be equipped with a hitch). Spreader is equipped with two platforms for operators - on the right and left side of the machine. The machine can be transported by truck - emulsion sprinkler on dedicated trailer (optional).
In the duo most likely
- Mounting to the sprinkler is done by towbar (emulsion sprinkler shall be equipped with a hitch)
- Spreader is equipped with two platforms for operators - on the right and left side of the machine.
- The machine can be transported by truck - emulsion sprinkler on dedicated trailer (optional).
Aggregate tank volume: | 1,7 m3 |
Aggregate size: | up to 31 mm |
Spreading width: | 0,25 – 3,00 m |
Spreading width adjustment: | gradual every 250 mm |
Method of adjustment: | pneumatic actuators on particular sections |
Actuators power supply: | from pneumatic system of sprinkler |
Drive of the shaft: | from the spreader wheels |
Support wheels: | on both sides - pneumatic tyred |
Dimensions: | 2900 x 3300 x 2000 mm |
Weight: | 1500 kg |