Asphalt crack routers MS
Intended use:
- Milling of grooves and gaps including expansion crack in asphalt or concrete with 8-angle mills;
- Cutting and milling of asphalt, concrete by diamond and corundum blades (max.5 pcs);
- Preparation of the surface before sealing (for example sealing compound, sealing tapes).
| Technical data: | Hydrog MS-60 |
| Max milling width (drum with cutters): | do 40 mm |
| Max milling depth (drum with cutters: | 35 mm (frez type A) 55 mm (frez type B) |
| Applied mills: |
8-angle type A ø 120 (6 mills) 8-angle type B ø 160 (3 mills) |
| Max milling depth (cutting discs – max. 5 pcs.): | 56 mm |
| Max milling width (cutting discs – max. 5 psc.): | 38 mm |
| Diamond blades diameter: | 400 mm |
| Drive: | petrol internal combustion Kohler engine |
| Engine power: | 25 HP |
| Rated engine speed: | 3000 min-1 |
| Engine rpm adjustment: | smooth adjustment (shifter on control panel) |
| Power transfer: | electric clutch + belt transmission |
| Cutters lifting / lowering: | electric |
| Electrical installation voltage: | 12 V |
| Dimensions (length x width x height) | 1.780 x 890 x 1.060 mm |
| Weight: | 220 kg |
